480 litre tank provided with E.Sydock for quick installation. It is suitable for potable water and is equipped with filling valve from the water supply (complies with UNI EN 1717), with AG type overflow system, suction hose with bottom valve and discharge hose. The tank is suitable for installation above ground and the four slots on the base facilitate the fixing to the ground. It is equipped with direct discharge under the tank. Even system maintenance is easy thanks to the practical inspection cap. The system is modular with the ability to install additional tanks on three sides (laterally and to the rear). E.Sytank is a drinking water storage tank, designed with integration of the E.Sybox booster pump system. Complete tank and pump system to boost mains water supply in domestic/ residential and light commercial applications. E.Sytank capabilities include: |Catering for the water requirement, if the public distribution main is insufficient. |Compliance with civil water regulations where pumping systems cannot draw directly from the distribution mains. Avoiding the reflux and possible contamination of water back into the distribution mains. |Use as intermediate tanks in tall buildings dividing a pressure boosting system into several areas. The E.Sytank and E.Sybox solution creates a complete pressure boosting system with high-efficiency, allowing: |Notable reduction of required space. |Dimensions suitable for passing through cellar door ways. |Tank supplied complete with all the accessories for rapid installation. |Full integration and simple installation of E.Sybox. |Recyclable Materials. | Tank suitable for potable water.